MING GREEN / TILE
MING GREEN / DETAIL
Soft green and white natural stone, composed of slender pieces with rounded ends. Three alternating widths create a delicate rhythm, with horizontal or vertical layouts to suit your space.
Rounded pieces. Three widths. Two directions.
* Confirm before ordering: the earlier Arta listing says 12 × 12 in mesh, while the catalogue lists 327 × 298 mm. Please confirm the supplied format and coverage per sheet.
Dry-lay the sheets and blend boxes to distribute natural colour and veining differences. Check the orientation and sheet-to-sheet joints before fixing.
Plan for a white adhesive compatible with natural stone. The catalogue recommends unsanded grout and sealing before grouting, then again after drying. Have your installer confirm the products, substrate and intended application.
Use a pH-neutral cleaner suitable for stone and a soft cloth. Avoid acidic, strongly alkaline or abrasive cleaners, and metal scouring pads.
Hover to magnify. On mobile, swipe through the photos and tap to zoom.
Natural stone
Natural stone has significant variations in colour, tone, veining and surface texture, along with naturally occurring imperfections. Images shown are representative of a sample of this material and may not display all potential variation. A minimum of 15 to 20% overage is recommended to account for curation and cuts, though additional overage allows for an even more controlled appearance.
Careful installation is essential with this soft, porous stone. Before setting any stone, unpack and mix pieces from all boxes to balance colour and veining across the layout. Use a thinset suitable for natural stone and ensure full back-buttering for complete coverage, then seal the stone twice, before and after grouting. Clean only with pH-neutral products, resealing periodically as needed.
Colour specification
Samples are not full sized and vary from collection to collection.
The samples are free; delivery is a $20 flat fee for up to 5 tiles. A distant address may cost more.
